Conical seat to Ball seat Adapter

from $20.00

Contact us if you need individual/replacements or options not listed below

Converts 60 degree conical seat nuts to ball seat

  • Can be used with all Motorsport Hardware standard conical and extended race nuts

  • Can be used with all thread sizes: 12×1.5, 14×1.5, and 14×1.25

  • Inserts between wheel and conical nut

  • Manufactured from hardened steel

  • Zinc plated

  • Outer diameter: 22.8mm, Inner diameter: 15.2mm, Height: 6.3mm

Tips for use:

  • To ensure safe use, when installing, make sure that you get at least 6.5turns when tightening nut

  • Re-check torque after first 20-100 miles of service and re-torque as required to 85-88ft/lbs

Quantity:

Contact us if you need individual/replacements or options not listed below

Converts 60 degree conical seat nuts to ball seat

  • Can be used with all Motorsport Hardware standard conical and extended race nuts

  • Can be used with all thread sizes: 12×1.5, 14×1.5, and 14×1.25

  • Inserts between wheel and conical nut

  • Manufactured from hardened steel

  • Zinc plated

  • Outer diameter: 22.8mm, Inner diameter: 15.2mm, Height: 6.3mm

Tips for use:

  • To ensure safe use, when installing, make sure that you get at least 6.5turns when tightening nut

  • Re-check torque after first 20-100 miles of service and re-torque as required to 85-88ft/lbs