JXB MQB Spherical Front Lower Control Arm Bushing Upgrade

The front lower control arm bushings are responsible for maintaining the alignment of the front end under all driving conditions. The factory bushings are soft and flexible, causing unwanted toe-in and camber loss during braking and turning. The spherical upgrade increases the precision, responsiveness, and feel of the front end:

• Inspires more confidence in corners

• Delivers better road feel and steering feedback

• Holds alignment under load

• Does not bind

• Eliminates random oscillations to increase grip

The JXB Front Lower Control Arm Upgrade is the only kit to replace both factory bushing locations with precision motorsport grade PTFE-lined spherical bearings for a no compromise front end solution.

Caster-Correcting Option

Choose the caster-correcting option to receive our offset rear bushings, which increase caster by approximately 1°. The increase in caster increases much-needed front end grip by increasing negative camber on the outside wheel and decreasing negative camber on the inside wheel during cornering (basically leaning the wheels into the turn). Please note that the the caster correction does push the wheel slightly forward in the wheel well which may cause tire clearance issues on aggressively stanced or lowered cars.

What’s Included

2 spherical front lower control arm bushing kits with motorsport-grade PTFE-lined spherical bearings

• FK WSSX10T bearings are standard, optional upgrade to Aurora bearings

  • Both options feature a stainless steel ball and race and bonded PTFE liner

Core Exchange Program

The JXB Spherical Front Lower Control Arm upgrade is designed to be pressed into the factory front lower control arms. Typically this is done with an H-frame hydraulic press. Don’t want to deal with it? We’ll press them in for you. We’ll send you a pair of factory arms completely assembled with our bushings. Just install them and send us back your original arms for a $200 core refund. Just select the core exchange option.